HM Aslam

Google AdsPublished ·10 min read

Performance Max vs Search Campaigns: Which Google Ads Campaign Works for UAE Leads

Performance Max vs Search for UAE lead generation: what each campaign does, which one wins when both run, why Performance Max brings junk leads, when it is worth testing, and the account setup I use at each budget.

By HM Aslam · Freelance Digital Marketer, Dubai

For most UAE businesses that want leads, start with a Search campaign. It only shows your ad when someone types what you sell, and you can see every search behind every lead. Performance Max can add more leads later, but only once your tracking counts qualified leads rather than every form fill.

I get asked this in almost every Google Ads audit I do in Dubai, usually after a Performance Max campaign has produced a month of cheap leads that nobody could close. Performance Max isn’t a bad product. It was built for a different job, and it needs things most small accounts don’t have yet. Below is how the two compare, why Performance Max leads go wrong, and how I decide what to run at each budget.

Diagram comparing a Google Ads Search campaign, which shows an ad only for chosen keywords with every search term visible, and Performance Max, which spends one budget across Search, YouTube, Display, Gmail, Discover and Maps with search terms only partly visible
Search waits for a keyword. Performance Max spends one budget wherever Google thinks a lead might be.

The difference in one table

SearchPerformance Max
Where ads showGoogle search results, plus search partner sites if you allow themSearch, YouTube, Display, Gmail, Discover and Maps, from one budget
What triggers an adKeywords you chooseGoogle’s AI, guided by your assets, audience signals and optional search themes
What you can seeEvery search term, against the keyword it matchedPart of the search terms, plus channel and placement reports
Control over spendBy keyword, ad group and campaignBy campaign. Google decides where the money goes inside it
What it needs to workA good keyword list and a landing page that convertsClean conversion data, plenty of images and video, and weeks to learn
Best forMost lead generation, and every small budgetExtra reach once Search is profitable and tracking is clean

If you only remember one row, make it the third. With Search, when a lead turns out to be rubbish, you can look up exactly what they searched and block it. With Performance Max you often can’t.

Google’s rule is simple. According to its Performance Max documentation, a Search campaign with an exact match keyword takes priority over Performance Max when a search matches that keyword exactly. Search themes inside Performance Max carry the same priority as phrase and broad match keywords, so for everything outside your exact match list, the two compete.

The independent data on that overlap is useful. Adalysis looked at more than 3,300 non-retail Performance Max campaigns and found that when Search and Performance Max were both eligible for the same search terms, Search had the higher conversion rate about 84% of the time (the Adalysis study). Optmyzr ran a similar check across 503 accounts and found a smaller gap: in most cases there was no real difference, and where there was, Search won slightly more often (the Optmyzr study).

So the honest summary is this: on search traffic, Performance Max rarely beats a well-run Search campaign, and often does worse. Its value is the reach outside search. There is one more trap. Performance Max loves branded searches, because people typing your business name convert easily, and that makes its results look better than they are. Add brand exclusions from day one.

Why Performance Max brings junk leads

Two loops: counting every form fill teaches Performance Max to find people who fill in forms, producing cheap junk leads; importing CRM-qualified leads teaches it what a real buyer looks like, giving fewer but better leads
The loop on the left is what happens by default. The loop on the right is the fix.

Google’s own lead generation guidance for Performance Max says it plainly: the AI is only as good as the data you give it. If every form submission counts as a conversion, Google’s job becomes “find more people who submit forms”. On YouTube and display sites, those people are often curious, careless or not real. I have seen leads with fake numbers, people from the wrong emirate, students doing research and the same person submitting three times.

The fix has three parts:

  • Count real outcomes. Mark leads in your CRM as qualified, booked or closed, and import those back into Google Ads, either as offline conversions or with enhanced conversions for leads. Make the qualified stage your main goal. Google recommends bidding on conversions as deep in the funnel as you can. If you don’t have a CRM that can do this, my CRM comparison covers which ones handle it.
  • Make the form harder to abuse. Google suggests reCAPTCHA, a qualifying question and server-side validation. A single question such as budget, area or move-in date filters out a lot of noise.
  • Demote soft actions. In the UAE, a lot of enquiries start with a WhatsApp click. A click is not a lead. Track it as a secondary conversion and count the chat only once your team marks it as a real enquiry. A simple lead scoring system makes that marking quick.

When Performance Max is worth testing

I test it when all of these are true:

  • Search already brings leads at a cost you are happy with, and you have run out of good keywords to add.
  • Your tracking counts qualified leads. Google suggests a goal with at least 15 conversions in the last 30 days for value-based bidding; for a lead account, I want about 30 qualified leads a month before testing.
  • You have real creative: several images and at least one video you made. If you don’t upload video, Google may generate one automatically, and it rarely looks like your brand.
  • You can wait. Google advises one to two weeks before major changes, and up to six weeks for complex setups or low volume.
  • Your buyers can be reached before they search. Interiors, aesthetic clinics and off-plan property suit it, because a YouTube or Discover ad can start the decision. Emergency services such as AC repair or locksmiths usually don’t, because the whole decision happens in one search.

How I structure accounts by budget

Staircase showing a Google Ads setup by monthly spend: under AED 5,000 Search only; AED 5,000 to 15,000 Search plus a Performance Max test with 20 to 30% of budget; AED 15,000 and up Search core plus Performance Max with CRM results imported
A staircase, not a switch. Each step only makes sense once the one below is working.
Monthly ad spendSetupWhy
Under AED 5,000Search only. Exact and phrase keywords, one ad group per serviceToo little data for Performance Max to learn. Every dirham should go to people already searching
AED 5,000 to 15,000Search keeps 70 to 80%. A Performance Max test gets 20 to 30%, with your brand excludedEnough volume to learn something, small enough that a bad test doesn’t hurt
AED 15,000 and upSearch for core keywords, Performance Max with CRM data for extra reach, Arabic in separate campaignsPerformance Max has the data it needs, and Search protects your best keywords

These splits are my own rule of thumb from running accounts, not a Google rule. What each of those budgets typically buys in clicks and leads is in my guide to Google Ads cost per lead in Dubai. If you are still deciding between Google and social ads, start with Google Ads vs Meta Ads.

Setting up Performance Max for leads without the junk

  1. One conversion goal, as deep as possible. Qualified lead or booked appointment, not “all form fills”. Google warns against mixing funnel stages in one target CPA.
  2. Start with Maximise conversions. Add a target CPA close to the most you would pay for a lead once it has data. A target set too low starves the campaign.
  3. Brand exclusions, so it can’t take credit for people already looking for you.
  4. Negative keywords at campaign or account level, from what you find in search term insights. There can be a delay before terms appear.
  5. Turn off Final URL expansion if Google starts sending people to your blog, careers page or anything that isn’t a landing page.
  6. Location set to “Presence”. Choose people in or regularly in your locations, otherwise leads arrive from outside the UAE. The exception is an off-plan developer that wants overseas buyers.
  7. Check the channel controls. Google now lets you put search partners and the Display Network on their own priority tier with a separate budget. If display placements bring the junk, turn them down.
  8. One asset group per service, each with its own headlines, images, video and landing page, so a dental implant ad doesn’t send people to a teeth whitening page.
  9. Leave it alone for two to six weeks, then judge it on cost per qualified lead.

The landing page matters just as much in both campaign types. If yours converts under 5%, fix that first; my notes on landing page conversion rates explain what to change.

What to measure

Compare the two campaigns on cost per qualified lead and, if you can, cost per sale. Cost per lead on its own will always flatter Performance Max. Each month, read the search term insights and the channel report for Performance Max, and the search terms report for Search, and add negatives for anything irrelevant. Put both campaigns in the same monthly report so you can see the trend; my marketing report template has a section for exactly this.

What I do for clients

I build Search campaigns around the searches that actually bring paying customers, set up conversion tracking that counts qualified leads instead of form fills, connect the CRM so those results flow back into Google Ads, and only add Performance Max when the account is ready for it. The monthly report shows cost per qualified lead by campaign, so you can see what each one is really worth.

Not sure which campaign your business needs?

As a Google Ads freelancer in Dubai, I can audit your account, show you which searches and placements your leads really come from, and tell you whether Performance Max is helping or just taking credit. Get in touch with your current monthly budget.

Frequently asked questions

Is Performance Max better than Search for lead generation?

For most service businesses, no. Search reaches people who are already looking and shows you every search term. Performance Max can add leads once Search is profitable and your tracking counts qualified leads, but on search traffic it rarely beats a well-run Search campaign.

Can I run Performance Max and Search at the same time?

Yes, and Google designs them to run together. When a search matches an exact match keyword in your Search campaign, Search gets priority. Add brand exclusions to Performance Max so it does not take credit for people already searching for your business name.

Why are my Performance Max leads low quality?

Usually because every form fill counts as a conversion, so Google finds people who fill in forms rather than buyers. Import qualified leads from your CRM, make them the main goal, and add reCAPTCHA and a qualifying question to your form.

How much budget do I need for Performance Max?

There is no official minimum, but it needs data to learn. I only test it once Search brings about 30 leads a month, which usually means at least AED 5,000 a month in total spend, starting Performance Max at 20 to 30 percent of the budget.

How long does Performance Max take to learn?

Google advises at least one to two weeks before major changes, and up to six weeks for complex setups or accounts with few conversions. Judge it on cost per qualified lead after that, not on the first week.

Can you see search terms in Performance Max?

Partly. Search term insights and the search terms report show many of the queries, and you can add negative keywords at campaign or account level. You still see less than in a Search campaign, where every term is listed against a keyword.

Should I use Performance Max for Arabic searches?

Run Arabic as its own Search campaign first, with Arabic ads and an Arabic landing page. Once that converts, an Arabic asset group in Performance Max can add reach. Mixing languages in one campaign hides which one actually brings leads.